LED LAMP WITH MOTION AND DUSK SENSOR

SMART PIR MOTION SENSOR – the light will turn on automatically when it detects movement – it will only turn on when the light sensor detects that it is dark. The light will light up continuously when it detects movement, when it does not detect movement it turns off automatically after about 30 seconds

PUT IT DOWN, HANG IT OR STICK IT DOWN – use as you need. You can hang, stand or simply stick the lamp.

ENERGY SAVING – when the light does not detect movement, it automatically turns off after 30 seconds. This will save batteries.

1 LAMP = MANY POSSIBILITIES – ideal for lighting the hallway, bathroom, basement, inside the wardrobe, stairs, shelves and all places where it is currently needed .

SPECIFICATION – material: PC; number of diodes: 6; lamp power: 0.5 W; time delay: 30 ±3 s; sensor viewing angle: 120°; light sensitivity: <10 Lux; sensor range: 5 m; power consumption: max 0.5W; colour temperature: 6000k; light colour: cold white; light brightness: 50 lm; operating temperature: 5-30st.C; luminous flux: 50 Lumens; power supply: 3x AAA (not included); dimensions (length / width / height): 8/8 / 2.5cm; weight with packaging: 71g.

SPECIFICATION

Material: PC
number of diodes: 6
lamp power: 0.5 W
time delay: 30 ±3 s
sensor viewing angle: 120°
light sensitivity: <10 Lux
sensor range: 5 m
power consumption: max 0.5W
color temperature: 6000k
light color: cold white
light brightness: 50 lm
operating temperature: 5-30°C
luminous flux: 50 Lumens
power supply: 3x AAA (not included)
dimensions (length/width/height): 8/8/2.5cm
weight with packaging: 71g

INCLUDED

lamp
double sided tape

PRODUCER:

ISO TRADE Spółka z o.o.
ul. Hangarowa 15
59-220 Legnica, Polska

office@iso-trade.biz

RESPONSIBLE PERSON IN THE EU:

ISO TRADE

WARNING CONTENT:

– Do not disassemble the device yourself.
– It is recommended to use it in a dry room.
– Do not repair the device yourself.
– The device must be used in accordance with its intended purpose.
-The lamp should not be used in humid conditions (e.g. bathroom) unless it is properly protected against moisture.
-The lamp should be placed out of the reach of children and animals to avoid accidental injury or damage to the device.
– If the lamp or any of its components (e.g. cable, plug) is damaged, stop using it until it is repaired or replaced.
-The LED night light should be used in normal room conditions. Extreme temperatures or humidity may affect its performance.